Autodesk Plant Exchange

Name

Description

AutoCAD Plant 3D 2013 SP1 Data Integrity Hotfix
Release date: February 7, 2013

 View the Readme for details.

AutoCAD P&ID 2013 SP1 Data Integrity Hotfix
Rease date: February 7, 2013

 View the Readme for details.

AutoCAD Plant 3D Service Pack 1
Release date: December 5, 2012

View the Readme for details.

AutoCAD P&ID 2013 Service Pack 1
Release date: December 5, 2012

View the Readme for details.

AutoCAD Plant 3D 2013 Pipe Supports and Isometrics Hotfix (localized version)

This hotfix applies AutoCAD Plant3D 2013 DEU, FRA, RUS, CHS.

AutoCAD Plant 3D 2013 End Connections Settings Hotfix

This hotfix applies to AutoCAD Plant 3D 2013 JPN, DEU, FRA, RUS, CHS.

AutoCAD P&ID 2013 End Connections Settings Hotfix

 This hotfix applies to AutoCAD P&ID 2013 JPN, DEU, FRA, RUS, CHS.

AutoCAD Plant 3D 2013 Pipe Supports and Isometrics Hotfix (English only)

This hotfix applies to AutoCAD Plant 3D 2013 English only.

AutoCAD Plant 3D 2013 Custom Parts Builder Hotfix

This hotfix corrects a problem that inch value displays with metric unit in the “Custom Parts Builder” palette. It applies to AutoCAD Plant 3D 2013. JPN, FRA, CHS, RUS.

AutoCAD Plant 3D 2013 Plantpipeadd command Hotfix

This hotfix corrects a problem that the options of the ‘_Plantpipeadd’ command are not responsive in command line.It applies to AutoCAD Plant 3D 2013. CHS, DEU, RUS.

AutoCAD Plant 3D 2012 Service Pack 2

This service pack addresses the following issues:

• Schematic Lines: Corrected a problem that corrupted an sline when another sline was linked to it.
• Off-Page Connectors: Corrected a problem that caused off-page connectors to fail to reconnect once a P&ID drawing was removed from a project and then added back.
• Isometrics: Corrected a problem in isometric drawings for pipe supports that are attached to an elbow or tee fitting.  Corrected a problem that caused isometric graphics to extend beyond the title block.

AutoCAD P&ID 2012 Service
Pack 2

This service pack addresses the following issues:

• Schematic Lines: Corrected a problem that corrupted an sline when another sline was linked to it.
• Off-Page Connectors: Corrected a problem that caused off-page connectors to fail to reconnect once a P&ID drawing was removed from a project and then added back.
• Isometrics: Corrected a problem in isometric drawings for pipe supports that are attached to an elbow or tee fitting.  Corrected a problem that caused isometric graphics to extend beyond the title block.

AutoCAD Plant 3D 2013 Off-Page Connector Hotfix

This hotfix applies to AutoCAD Plant 3D 2013. If a P&ID drawing is removed from a project and then added again, you cannot reconnect the off-page connectors. This hotfix will resolve this issue.

AutoCAD P&ID 2013 Off-Page Connector and SQL Server Hotfix

 This hotfix applies to AutoCAD P&ID 2013. Installing this hotfix will resolve these issues:

• SQL Server: An AutoCAD P&ID 2012 project using an SQL Server database and SQL Server Authentication cannot migrate to AutoCAD P&ID 2013.
• Off-Page Connectors: If a P&ID drawing is removed from a project and then added again, you cannot reconnect the off-page connectors

AutoCAD Plant 3D 2012 SP1 Isometric Pipe Supports Hotfix 

This hotfix applies to AutoCAD Plant 3D 2012 with Service Pack 1 applied. Please review the readme file for installation instructions and details regarding the issues resolved by this hotfix.

AutoCAD Plant 3D 2012 SP1 Off-Page Connector Hotfix

This hotfix applies to the AutoCAD Plant 3D 2012 with Service Pack 1 applied. Please review the readme file for installation instructions and details regarding the issues resolved by this hotfix.

AutoCAD P&D 2012 SP1 Off-Page Connector Hotfix

This hotfix applies to the AutoCAD P&ID 2012 with Service Pack 1 applied. Please review the readme file for installation instructions and details regarding the issues resolved by this hotfix.

This service pack addresses the following issues:

Ortho Drawings

• Corrected a problem that prevented flanges on flanged pipes from displaying in ortho drawings.
• Corrected a problem that prevented polyface and polygon meshes from displaying on ortho drawings.

Spec Conversion

• Corrected a problem where unexpected spaces caused problems during AutoPLANT spec conversion.

Sloped Pipe

• Corrected a problem that made it impossible to place a flange at the intersection of a sloped pipe and an elbow.
• Corrected a problem that caused a cutback elbow to become disconnected after using the plantpipeslope command.

Isometrics

• Corrected a problem that caused changes made to title blocks to disappear.
• Corrected a problem that prevented welds sizes from being exported to a PCF file properly.

Pipe Cutback Angle

• Corrected a problem that caused the loss of the cutback angle when using the substitute grip.

Report Creator

• Corrected a problem that prevented Report Creator from opening projects that require SQL authentication.

Nozzle Tags

• Corrected a problem that caused nozzle tags to reset inappropriately after using the auditproject command.

Plotting

• Corrected a problem that prevented wipeouts from displaying in a plotted drawing, although they displayed properly onscreen.

 
Stretch Operation

• Modified the behavior of P&ID objects and schematic lines during a stretch operation to improve the user experience.

Block Editing

• Corrected a problem that caused changes made to a specific block in the block editor to affect other blocks in the project.
• Corrected a problem that caused a hidden line (added during a block edit or symbol edit) to be displayed as a continuous line when a drawing is printed or plotted.

This service pack addresses the following issues:

Report Creator

• Corrected a problem that prevented Report Creator from opening projects that require SQL authentication.

Nozzle Tags

• Corrected a problem that caused nozzle tags to reset inappropriately after using the auditproject command.

Plotting

• Corrected a problem that prevented wipeouts from displaying in a plotted drawing, although they displayed properly onscreen.

 
Stretch Operation

• Modified the behavior of P&ID objects and schematic lines during a stretch operation to improve the user experience.

Block Editing

• Corrected a problem that caused changes made to a specific block in the block editor to affect other blocks in the project.
• Corrected a problem that caused a hidden line (added during a block edit or symbol edit) to be displayed as a continuous line when a drawing is printed or plotted.

This hotfix corrects a problem where unexpected spaces caused failure during AutoPLANT spec conversion.

This hotfix addresses an ortho issue as follows:

• Corrected a problem that caused flanges to not display for flanged pipes in ortho drawings.

Issues Resolved by This Update:

Sloped Pipe

• Corrected a problem that made it impossible to place a flange at the intersection of a sloped pipe and an elbow.
• Corrected a problem that caused a cutback elbow to become disconnected after using the plantpipeslope command.

Routing with Cutback Elbows

• Corrected a problem that caused a cutback elbow (or other elbow that is not 90 degrees) to become placed off centerline when routing.

This hotfix addresses sloped pipe issues as follows:

• Corrected a problem that made it impossible to place a flange at the intersection of a sloped pipe and an elbow.
• Corrected a problem that caused a cutback elbow to become disconnected after using the plantpipeslope command.

• Creating a project based on another project - Corrected a problem that prevented the creation of a new project based on an existing project.
• Exporting a filtered report - Corrected a problem that caused all data to be displayed in the exported report instead of only the specified filtered data.
• Isometric drawings - Corrected a problem that caused the display of a component's long description at the point of connection between two iso drawings. The drawing number of the connecting drawing is now displayed instead.
• Incorrect bolt lengths in PCF file - Corrected a problem that caused all bolt lengths to change when a longer bolt was required for a wafer-style valve flange.
• Assigning a metric actuator as a valve operator (Catalog Editor) - Corrected a problem that prevented assigning a metric actuator as a valve operator.
• Creating a second actuator (Catalog Editor) - Corrected a problem that prevented the creation of a second actuator.

This hotfix addresses the following issues:  

• Creating a project based on another project - Corrected a problem that prevented the creation of a new project based on an existing project.
• Exporting a filtered report - Corrected a problem that caused all data to be displayed in the exported report instead of only the specified filtered data.

This hotfix addresses the functional issues with some command line sub-options for AutoCAD Plant 3D 2011 German, Japanese, and Russian.

AutoCAD P&ID 2011 & Plant 3D 2011 Service Pack 1

The AutoCAD P&ID 2011 Service Pack 1 addresses issues related to stretching, line grouping, and off-page connectors.

The AutoCAD Plant 3D 2011 Service Pack 1 addresses issues related to metric/mixed metric valve insertion, performance issues, and other issues.

To view installation instructions and the full list of the issues resolved with this service pack, click here. The service packs also include the AutoCAD 2011 Update 1.1, which fixes the issues as listed in the AutoCAD 2011 Update 1.1 Readme.